GPS Receiver Module

Item No.: EB-85A
Product description :
The main goal of EB-85A is to be used as a part of integrated system, which can be a simple PVT (Position-Velocity-Time) system, for instance, G-mouse, PND (Personal Navigation Device), or complex wireless systems, such as a system with GSM function, a system with Bluetooth function, and a system with GPRS function. The module (EB-85A) can be the best candidate for users' systems as the users' systems need the careful consideration on the performance, sensitivity, power consumption, and/or size of the module. In the specification of EB-85A at the next page, it is noticeable that in addition to excellent start-up times and position accuracy, the updated rate can be up to 5 Hz and the sensitivity of -158dbm. The active antenna on board helps the system integrators to do the design-in easily. EB-85A is feature with high sensitive GPS receiver and GPS antenna. The perfect match is most suitable for any GPS mobile devices, such as PND, GPS PDA, personal tracker and any portable devices, which need GPS features. Features: ．High sensitive GPS receiver and GPS antenna ．High Sensitivity -158 dBm ．Excellent start-up times and position accuracy ．Power Supply 3.3~5V +- 5% ．Updated rate can be up to 5 Hz ．30mm(L) x 30mm(W) x 8.6mm(H) Specifications: PHYSICAL CONSTRUCTION Dimension:30(L)mm x 30 (W) mm x 8.6 (H) mm Weight:15 grams Receiving frequency:1575.42MHZ; C/A code Connector:8pin connector with 1.0mm pitch Mounting:Soldering Construction:Full EMI Shielding ENVIRONMENTAL CONDITIONS Temperature:Operating: -30oC ~ +80 oC                        Storage: -40oC ~ +85 oC COMMUNICATION Protocol:NMEA V3.01 Signal level:UART @ 2.8V * 2 INTERFACE CAPABILITY Standard Output Sentences:Default:RMC, GGA, GSV*5, VTG, GSA*5                                                  Optional:GLL, ZDA PERFORMANCE Built-in Antenna :Highly-reliable ceramic patch Sensitivity:-158dbm SBAS:1 channel (Support WAAS, EGNOS, MSAS) DGPS: RTCM Protocol Receiver architecture:32 parallel channels Start-up time:Hot start:1 sec. typical                        Warm start:35 sec. typical                        Cold start:41 sec. typical Position accuracy:Without aid:3.3 m CEP DGPS (RTCM):2.6 m Velocity accuracy:0.1 Knot RMS steady state Update Rate:1~5 Hz Power Supply:3.3~5V +- 5% Power Consumption:Acquisition :59mA                                     Tracking59mA (first 5 minutes)                                                     42mA (after 5 minutes)                                                     33mA (after 20 minutes) Baud Rate:4800 bps (default) &                    4800/9600/38400/57600/115200 bps are adjustable